Out of Stock
The Model Three is our entry level Wine Preservation System. Featuring a molded architecture in a neutral colorway and limited accessories, it is a perfect introduction to Coravin Wine Preservation Systems.
The Model Three Wine Preservation System is our entry level Wine Preservation System, featuring a moulded architecture in a neutral colorway.
If your Coravin Needle becomes clogged, use the Needle Clearing Tool to clear out any cork particles.
A New Way to Pour Wine
Align the SmartClamps™ over the neck of the bottle and push down firmly on the Handle in one fluid motion.
Tip & Pour
Tilt the bottle until the Spout is over the glass. Quickly press and release the Trigger to pour.
How to Pour with the Coravin Timeless Wine Preservation System
Each Capsule will allow you to pour up to 15 five-ounce (150ml) glasses of wine with Timeless Systems or 20 five-ounce glasses with Pivot™ Systems.
Average Pour Rate
On average, a 5-ounce (150ml) pour of wine with a Standard Needle will take 25 to 29 seconds.
The Needle in the Coravin System is intentionally off-center, so the Needle will insert into the cork in a different place every time.
The comfortable Handle has a large gripping area to pour wine effortlessly.
Easy On, Easy Off with SmartClamps™
SmartClamps™ allow you to simply insert your Coravin Timeless system onto the bottleneck in one quick, firm push, then it’s secure and ready to use.
Coravin Pure™ Argon Capsules
100% ultra-pure argon gas powers both Timeless and Pivot systems and preserves your wine.
Size & Weight
- 8.46 in / 21.5 cm
- 1.99 in / 5.05 cm
- 3.93 in / 10 cm
- 0.85 lbs / 380 g
- Model Three Wine Preservation System
- Injection Molded Plastic, Stainless Steel, Elastomers
- Coravin Pure™ Argon Capsules (21 ml)
- Recyclable steel, 100% pure argon gas, Synthetic rubber, Fiberglass-reinforced nylon
- Timeless Standard Screw Caps
- Injection Molded Plastic, Silicone, Polyethylene
- Needle Clearing Tool
How do Coravin Timeless Wine Preservation Systems work?
The Coravin Timeless Wine Preservation System is easy to use - just insert, tip, and pour. Place the Coravin Timeless System on top of the bottle and push the Needle through the cork. Coravin Timeless Systems work on all cork-sealed, still wines. Tip the bottle as if you are pouring from an open bottle. Quickly press the trigger to pressurize the bottle. Release the trigger to pour into your glass. For the Timeless Eleven just tilt and pour. Tip the bottle back up to stop the pour. Remove the Needle by pulling the system straight up. The cork will reseal naturally and continue to protect your wine for weeks, months, or even years.
How do I change a Needle?
What types of wine cork closures does the Coravin Timeless System work with?
Bottles closed with natural cork will reseal after pouring with the Coravin Timeless wine preservation system. Please keep in mind that a colder cork will take longer to reseal (about 1 minute). Leave chilled bottles standing upright after pouring to allow more time to reseal.
Coravin Timeless systems will also work with agglomerated cork, multi-piece cork, and twin top cork. Be careful when using bottles with wax seals. A thin wax coating will not affect usage – it is malleable enough that it will not damage the needle or hinder your ability to access wine. A thick waxy disc underneath the foil, most common in vintage Ports, can cause serious damage to the needle.
Coravin Timeless systems DO NOT work with glass closures. This type of closure will cause permanent damage to the Coravin needle. Customers should utilize Coravin Pivot to preserve bottles with glass closures.